FIRE RETARDANT 
fireprod@aol.com

www.fireretardant.co    EMAIL:  fireprod@aol.com

Flame Safe fire retardant logo
2650 Warfield Ave.
Fort Worth, TX 76106
AFTER HOURS  & WEEKENDS 817-658-9197
COMPANIES
​​
FIREBUSTER™ welding blanket, fire extinguisher, a multiple use fire retardant protective device for extinguishing stove top grease fires, eliminates smoke. As a welding blanket, welding slag will not burn through, it protects the underlayment from fire damage. A must for automobile, recreational vehicle and boat repair facilities,waste baskets  and more. 
RECOMMENDED USES:
Commercial: Hotels, Motels, Restaurants Many cooking fires occur during food preparation when the cooking equipment is left unattended. Using the FIREBUSTER™, if a fire occurs, instead of relying on fire extinguishers or sprinkler systems, the FIREBUSTER™ prevents food products from being destroyed, time loss due to clean-up, and loss of business sales.

Industrial: 
AutoBody Repair Shops, Welders, Marinas The FIREBUSTER™ can be safely used to protect interiors or other areas from fire. When working with such items as torches or welding equipment, the FIREBUSTER™ prevents sparks from igniting flammable items, hot slag will not burn through.

Residential/Office: 
Kitchen stove top grease fires, Waste basket fires, Camping, Charcoal grills, Recreational Vehicles
  IF FIRE OCCURS
  1.  Turn off the heat source
 2.  FIREBUSTER  may be used to cover the pan, grill or deep fryer containing the fire
 3. Open the plastic bag, remove the FIREBUSTER , unfold it completely. Hold the FIREBUSTER by the upper two corners, hold at shoulder length in front of your body. Calmly move the firebuster towards the flames and cover it completely.  Be sure the FIREBUSTER is stretched over the utensil containing the fire so that it does not sag to the center allowing the hot combustible liquid to penetrate the FIRE BUSTER. 
 4. The FIREBUSTER must cover the utensil containing the fire fire completely. Incomplete coverge can allow oxygen in, that could keep the fire going.
CAUTION MUST BE TAKEN WHEN APPLYING THE FIREBUSTER; IF USED IMPROPERLY, THE FIREBUSTER MAY BECOME IMPREGNATED WITH GREASE THE COULD POSSIBLY IGNITE.
 5.  It will require approximately 15 minutes for the oil in a heared cooking utensil to be cooled to a temperature which will prevent re-ignition.
  6. If flaming persists Call Fire Department.

Do not wash or dry clean.  After use of FIREBUSTER, the product shoud be discarded, more than one use may reduce the efficiency of the FIREBUSTER.
FIREBUSTER
Firebuster liquid solution for making fire retardant devices
QUICK REFERENCE FOR APPLYING FIREBUSTER SOLUTION
1. Shake well before using
2. Do NOT Dilute
3. Use any terry cloth towel available new or used. Be sure there are no holes or splits on old used towels. 
4. Hang or lay flat terry cloth towel .
5. Apply with trigger sprayer provided, adjust nozzle to spray position
6. Spray Firebuster solution on both sides of the towel until wet
7. Allow to dry 12 to 24 hours.   DO NOT USE A CLOTHES DRYER
8. Wash hand thoroughly with soap and water.
FIREBUSTER SOLUTION
 NEW Product  Flame Retardant  spray for MAKE YOUR OWN welding blankets and flame extinguishing device
FIREBUSTER
 Cal Fire 1237.1
​fire extinguishing device, welding blanket, slag will not
burn through

$49.50
​​FLAME SAFE
FIREBUSTER LIQUID
Cal Fire 1237.1
​fire retardant spray
make your own
welder's blanket up
to 50sf.or 3 devices

$34.50
Flame Safe Chemical Corporation is the only fire retardant coatings manufacturer designated by The Federal Emergency Management Agency (FEMA) as a partner under the Project Impact Program. The mission of Project Impact and the partnership with Flame Safe Chemical Corporation is to prevent or to mitigate the loss of lives, property and economic impact caused by fire hazard events. Experience has shown that all of Flame Safe’s products are suitable to achieve this endeavor.